Instructions for Using Our Candle Molds

First and foremost, thank you for choosing our candle molds. We are ready to provide you with detailed instructions on how to use them to ensure a smooth and successful candle-making process.

1. Prepare the Mold:

  • Ensure that the mold is clean and dry before starting.
  • Before first use, it is recommended to wash the mold with warm water and liquid soap using a soft sponge. Thoroughly rinse and dry.

2. Wax and Additive Selection:

  • Use high-quality candle wax and additives specifically designed for candles.
  • Do not add chemical substances such as fragrances or dyes not intended for candles to the wax used in the mold.

3. Pouring the Wax:

  • Melt the candle wax according to the instructions on the packaging.
  • Carefully and evenly pour the melted wax into the mold, leaving some space at the top.

4. Cooling and Solidifying:

  • Allow the wax to cool and solidify in the mold. The cooling time depends on the type of wax and the size of the candle.
  • Do not rush to remove the candle from the mold; give it enough time to fully solidify.

5. Disassembling the Mold:

  • To disassemble the mold, gently bend or slightly rock it to separate the candle from the mold’s walls.
  • Never pull or tug on the mold strongly to avoid damage.

6. Mold Care:

  • After each use, rinse the mold with warm water and a soft sponge using liquid soap.
  • Dry the mold with a paper towel and store it in a dry place, avoiding direct sunlight.

7. Reuse:

  • Following the care recommendations, our molds are capable of creating 100 or more candles.

We hope this instruction will make your experience working with our molds enjoyable and productive. Don’t forget to follow safety recommendations when working with wax and boiling water. Good luck in creating your unique candles!